Category: Tech Support

Intermittent operation is almost always a connection issue.Most common causes:Loose connectorsDamaged connectorsDamaged wiresRecommended fix:Reseat detached...

Most common causes:Loose or disconnected wireIncorrect wiringWrong timer outputPayment system not sending start signalBad motors or fusesRecommended fix:Confirm...

Most common causes:Load wire installed on LINE instead of NO (Normally Open)Timer bypassed and wired directly to motorsIncorrect push-to-start wiringRecommended...

Most common causes:Air leaks in hose or at reel swivelsWorn or damaged chucksCompressor issuesRecommended fixes:Inspect hose and reel swivel for leaks....

My machine goes on & off or won’t turn on, what should I do?Potential fixes:Check coin mech wires to mircro switchMake sure they are on ‘com’...

Nothing is coming out of my scent machine, what do I do?Potential fixes:Start machine and set switch for one of the scentsHold your finger over the tip...

How do I change the Digital Display Readout?Potential fixes:Purchasing a remote control with unit Programming can be done at JE Adams prior to shipment Use...

Click Here to learn more about the differences between ETL and UL